LightLink-CXL – Service Manual
Rev. No. : 01
Page
33
of
98
Section 5 System Overview
5.1
General Operating Theory
LightLink-CXL Corneal Cross-linking System is a specialized Ophthalmic Medical Device
controlled by sophisticated PC embedded software integrated with the system. The
system emits a low level UV-A light of 365nm, produced by the UV LED (Light Emitting
Diode) Cluster, through a specialized Optical Module producing a homogeneous spot
size and power controllable beam, intended for delivery on Corneal Surface.
The intention of the device is to allow a non-invasive treatment of Corneal disorders
utilizing a controllable ultraviolet light in a procedure clinically referred to as Corneal
Cross-linking.
The system consists of three major parts:
-
Laser Head,
- Control Box, and
- LCD touch control panel integrated with computer platform
A coil power cord is uncoiled and connected to appropriate source power plug in order
for system to function properly first. Secondly, power switch on the LCD control panel
display is then turn on and wait for the system to boot up properly without any error.
Once the software is properly boot up, then the key-switch is inserted and turned to the
ON position (with the Emergency switch in the out or OFF position). And then the laser
head microprocessor controller will perform some internal checks to verify that the
machine is functioning as it should be.
Camera and aiming are enabled when the system is boot up properly and now the
system is ready to perform the treatment accordingly.
Summary of Contents for LightLink-CXL
