LightLink-CXL – Service Manual
Rev. No. : 01
Page
25
of
98
Note: Unevenly slide in will result laser arm imbalance possible causing the entire
laser arm ass’y to fall off. The wiring clearance is critical in this procedure since it
may result in broken or loosen wiring during the arm swinging process
-
Place the end cap after
the wiring clearance process is completed it
-
Take the tray table top and gently slide over the base and secure with the two screws
Note: The height can be determine on the user preference but once secured the
tray top will remain the adjusted height and can’t longer adjustable until it reset it
again
Figure 4.13 Tray Table Assembling
Height will be fixed
once secured
Summary of Contents for LightLink-CXL
