LightLink-CXL – Service Manual
Rev. No. : 01
Page
12
of
98
Equipment not suitable to use near a flammable anesthetic mixture with air,
oxygen or nitrous oxide.
DO NOT
point the light beam to flammable materials (cotton, etc.).
Turn off the equipment when it is not in continuous use, and make sure to keep
the place used protected so that it is not be handled or used by unqualified
persons.
DO NOT
block the ventilation grid at the optical module.
Cleaning of the equipment should be done when it is turned off, using a slightly
moistened clean non-abrasive cloth.
DO NOT
use solvents or abrasive cleaning
products.
There may be a fire risk and/or explosion when the light output is near
flammable materials, solutions or gases.
Only use the Touch Screen PC provided by manufacturer which is IEC60601-1
approved.
Disposal of this product may be regulated in your community due to
environmental considerations. For disposal or recycling information, please
contact your local distributor and/or the manufacturer.
2.3
User Safety
The LightLink-CXL Corneal Cross-Linking System is electro medical equipment emitting
ultraviolet light, developed in accordance with the International Standards for Safety.
For the type of equipment that emits ultraviolet light, it is recommended to avoid
exposure of skin and eyes to the light beam if no therapy is being performed. The
operators must be aware that
they cannot look directly to the light beam and cannot
point it to the skin.
Special attention should be given to avoid that some reflected light in mirrored surfaces
reaches the eyes accidentally. It is essential to use protective glasses to prevent the
spread of UV light. Check with the Technical Assistance of LightMed in case of doubts.
It must be dispensed special attention to avoid that the reflected light in
mirrored surfaces hit the eye accidentally. The utilization of protector glasses
that block the UVA light propagation is indispensable. Consult the LightMed
technical support team in case of doubt.
Only personnel authorized by LightMed can open and perform internal
maintenance of the equipment. There is a risk of electric shock if opened and
handled by unauthorized personnel.
Summary of Contents for LightLink-CXL
