Lifasa SV030iH-2U, Manual, Page: 33 / 98

Chapter 3 – Quick-Start Procedures
31
3.3.2 Frequency Set by Keypad and Run/Stop by External Source
1. Confirm ‘Manual T/K’ in DRV 00.
2. If different, as in section 3.1 of this chapter, select
‘Key’ in FUN 01 and ‘Terminal-1’ or Terminal-2’
in FUN 02.
3. Set a frequency reference in DRV 00.
4. To run the motor in the forward direction, close
the [FX] terminal to the [CM] terminal.
5. To run the motor in the forward direction, close
the [RX] terminal to the [CM] terminal.
DRV
¢º
Manual T/K
00 FWD 60.00 Hz
FUN
¢º
Freq. set
01 Key
FUN
¢º
Run/stop set
02 Terminal-1
EG
RST
FX RX
P2 P3 P4 P5
BX CM VR V1
P6 CM I FM
V2 IO
LM CM
PROG ENTER
DRV
¢º
Manual T/K
00 FWD 60.00 Hz