Lifasa SV030iH-2U, Manual, Page: 22 / 98

Chapter 2 - Operation
20
2.2 Display
The LCD keypad can display up to 32 alphanumeric characters. Various settings can be checked directly from
the display. The keypad is fully upload and download capable. The following is an illustration of the keypad
2.3 Alpha-numerical Display
DRV
¢º
Manual K/K
00 FWD 60.00 Hz
32 Character, back lit,
LCD display . The
backlight is adjustable.
The Mode Button moves
through the three
program groups: DRV,
FUN and I/O
The Up and Down
Arrows
are used to
move through and
change data.
The Reverse Run
Button blinks when the
drive Accels or Decels.
The Program Button is
used to go into
programming mode to
change data.
The Enter Button is
used to enter changed
data within a parameter.
This button is used to
move cursor across
display in programming
mode.
The Forward Run
Button blinks when the
drive Accels or Decels.
The
Stop Button
blinks
when there is a fault.
The Reset Button is
used to reset Faults.
Manual mode is selected
Run/Stop method selection
Source of reference frequency
Drive output frequency during run,
Otherwise display command frequency
Direction of rotation
Parameter code
Parameter group