LI-COR LI-600 Instruction Manual Download Page 29

Page: 29 / 131

LI-600 Porometer/Fluorometer Instruction Manual

4-2

here, you can proceed with or without a connected LI-
600 or safely eject a connected instrument.

The software may display warning messages. See

Soft-

ware warning when connecting the LI-600

on page 7-2 and

Software warning when updating the firmware

on page 7-3.

Figure 4-1

. Connection overview.

At the Connection Overview screen, you will receive
one of the following prompts upon starting the com-
puter software.

LI-600 connected!

An LI-600 is powered on and has

been discovered by the computer software.

Select

Explore LI-600

to access Configuration Man-

agement, Data Management, Live View, Connection
Overview, and Barcode Generator.

Select

Offline Mode

to access the Configuration

Management, Data Management, Connection Over-
view, and Barcode Generator options that are avail-
able without an LI-600 connected.

Select

Eject LI-600

to safely disconnect and power

down the instrument.

Summary of Contents for LI-600




































































































































Search results

Summary of Contents for LI-600

Reviews:

Brands by name

Popular brands

LI-COR LI-600, Instruction Manual

Search results

Summary of Contents for LI-600

Reviews:

Brands by name

Popular brands