LI-COR LI-600, Instruction Manual

Page: 14 / 131

Section 1. The LI-600
1-5
10 hours and is not recommended. To charge in less
than two hours, use a USB wall adapter that supports
Qualcomm® Quick Charge™ (QC) 2.0 or 3.0. When
fully charged, the instrument will operate for approx-
imately 8 hours of active use; however, battery life can
vary due to age and amount of use. External battery
packs are suggested for expected use longer than 8 con-
secutive hours.
Charging temperature : the battery will only charge
when the pack temperature is within 0 to 45 °C. If the
pack reaches a temperature outside this range, it will
automatically stop charging.
Powering the LI-600 on and off
To power on the LI-600, press and hold the round enter
button on top of the instrument.
To power off the LI-600, navigate to Settings by press-
ing the left arrow at the Select Configuration screen,
then select
Shut Down and press the Enter button. If
the LI-600 is not responding and the settings cannot be
accessed, power off the instrument by pressing and hold-
ing the Enter button for seven seconds; avoid this, as the
last data record could be lost. Power off the instrument
when not in use.
Using the universal charging adapter
The included universal charging adapter is compatible
with main power in most localities globally (input: 90
to 264 VAC, 50 to 60 Hz; output: 5 VDC, 1 Amp). You
may need to install different blades from the outlet
adapter kit to fit your outlets.