LG Aria-24IP Page 30 User Manual Download | Manualshive

Page: 30 / 54

background image

●●●●

aria

–

24IP

DIGITAL KEY TELEPHONE SYSTEM USER’S GUIDE

30

085: No Answer Prompt
086: Reserved
087: Reserved
088: Remote VMIB Control Main Menu Prompt
089: Remote VMIB Sub-menu for digit 1 in Main Menu Prompt
090: Reserved
091: Reserved
092: Reserved
093: Remote VMIB Sub-menu for digit 2 in Main Menu Prompt
094: Remote VMIB Sub-menu for digit 3 in Main Menu Prompt
095: Remote VMIB Sub-menu for digit

in Main Menu Prompt

096: Leave Message after Tone Prompt (mailbox)
097: Message Waiting Prompt (SLT mailbox)
098: Recordable Default Greeting Prompt for Mailboxes
099~100: Reserved

071: VMIB MOH
072: Reserved
073: Invalid Number Prompt
074: Time out Prompt
075: Retry Prompt

076: Transfer to Attendant Prompt

077: Reserved
078: Leave Message Prompt
079: Record Start Prompt
080: Authorization Code Prompt
081: Busy Prompt
082: Reserved
083: Station Off-net Forward Prompt
084: DND Prompt

System Greetings (cont)

The System Prompt messages are 071~100

Button

Procedure

To store system speed numbers,

Press

Trans/Pgm

button.

Dial

Speed key

.

Dial speed number bin.

If required, Press desired outside line or CO Group button. (If this setting is applied, the

speed dial will only use this line/line group. To skip, just go to the next step)

Dial the phone numbers to be stored.

Dial

Hold/Save

button.

Enter Speed Dial NAME (to 16 characters).

Hold/Save

.

To use system speed numbers,

Press

Speed key

.

Dial speed number bin.

A group of speed dial numbers can be stored within the system for access by allowed stations. These numbers provide
speedy access to often used outgoing CO dialing numbers.

System Speed

Dial Range:

2000~2499

System Speed Dial Entry

Range

2000~2499

(Ph Number)

2000~2499

To activate temporary COS change, (to ICM only, no CO access, COS 7)

Press

Trans/Pgm

button.

Dial

0 2 1

Enter the station range.

Press

Hold/Save

button.

Button

Procedures

The System Attendant can change the class of service of another Station to Class of Service 7 (COS 7) to prevent
unauthorized use of that station.

To remove temporary COS change, (restore to original COS)

Press

Trans/Pgm

button.

Dial

0 2 2

Enter the station range.

Press

Hold/Save

button.

Temporary COS Change

Range

0 2 1

(Station range)

0 2 2

(Station range)

Button

Procedure

This feature allows the attendant to set the Time/Date without entering Admin Programming.

Press

Trans/Pgm

button.

Dial

0 4 1

Enter Date as MMDDYY (6 digits) and press

Hold/Save

button.

Enter Time as military format (4 digits) and press

Hold/Save

button.

If there is no need to change date or time, press

Hold/Save

button to go to the next step.

Time and Date Setting (Attendant Clock Set)

0 4 1

(MMDDYY)

(HHMM

(24hr)

)

Range

A

tten
d

a

n

t O

p

er
a

tio

n

«
...
28
29
30
31
32
...
»

Summary of Contents for Aria-24IP























































Reviews:

No comments

Related manuals for Aria-24IP

Brand: Rath Pages: 6

Brand: Panasonic Pages: 66

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 10

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 2

OFFICESERV 100 Series

Brand: Samsung Pages: 42

W60P Telesystem

Brand: Yealink Pages: 2

Brand: Yealink Pages: 2

Brand: Yealink Pages: 2

CP930W Telesystem

Brand: Yealink Pages: 14

Brand: Yealink Pages: 2

Brand: Panasonic Pages: 1

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 20

Brand: PURE Pages: 88

2.4 GHz Digital Spread Spectrum Cordless Telephone with Call Waiting/Caller ID

Brand: Radio Shack Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands