LG Aria-24IP User Manual Download

Page: 50 / 54

●●●●

aria

–

24IP

DIGITAL KEY TELEPHONE SYSTEM USER’S GUIDE

Commonly used Telephony Acronyms

Centralized Attendant Service for Networked (IP Networking) Sites

CAS

The service that facilitates a call waiting signal at a busy Station, of another call

Camp On

The caller (CLIP)

Calling Party

The party being called (CPN)

Called Party

The service that allows a user to park a call to be retrieved by any other station

Call Park

The service that allows a caller to leave a message on unanswered station

Call Back

Basic Rate Interface (ISDN BRI CO line)

BRI

Busy Lamp Field (shows status of a programmed flexible key via its LED state)

BLF

Back Ground Music (through the station speaker)

BGM

The routing to the attendant of an unanswered call

Attendant Recall

Attendant Station (a telephone operator of the IP LDK)

ATD or Attendant (Station)

Administration (the data base programming mode)

ADMIN (program)

Automatic Call Distribution (also called UCD)

ACD

The password used to check the authority of user. ('Authorization Code' is used
as a synonym in this document)

Account Code or Authorization Code

Displays on a (calling Station’s) LCD the reason for a persons (called Station)
absence.

Absent Text Message

The flexible button for CO line access function about CO group

{POOL} or {CO Group}

The flexible button for CO line access function about all accessible CO lines

{LOOP} or LOOP

The flexible button for CO line access function about one CO line

{COL}

The fixed button for the volume up and down function.

[UP]/[DOWN] or [VOLUME
UP]/[VOLUME DOWN]

The fixed button for the transfer and ADMIN program function.

[TRANS] or [TRANS/PGM]

The fixed button for the speed function.

[SPD] or [SPEED]

The fixed button for the redial function.

[REDIAL]

The fixed button for the (speech) mute function.

[MUTE]

The fixed button for the on-hook and off-hook function.

[MON]

The fixed button for the intercom function

[ICM] or [Intercom]

The fixed button for the hold and save function.

[HOLD] or [SAVE] or [HOLD/SAVE]

The fixed button for the flash function

[FLASH]

The fixed button for the DND and call forward function.

[DND] or [FWD] or [CFW] or [FOR]
or [DND/FWD]

The fixed button for the conference function.

[CONF]

The fixed button for the call back function.

[CALLBK] or [CB] or [CALLBACK]

Meaning

Abbreviation / Keywords

Summary of Contents for Aria-24IP























































Search results

Summary of Contents for Aria-24IP

Reviews:

Related manuals for Aria-24IP

Brands by name

Popular brands

LG Aria-24IP, User Manual

Search results

Summary of Contents for Aria-24IP

Reviews:

Related manuals for Aria-24IP

Brands by name

Popular brands