Lexmark XC6152 User Manual Download Page 12

Page: 12 / 301

•

Keep the printer:

–

Clean, dry, and free of dust.

–

Away from stray staples and paper clips.

–

Away from the direct airﬂow of air conditioners, heaters, or ventilators.

–

Free from direct sunlight and humidity extremes.

•

Observe the recommended temperatures and avoid ﬂuctuations:

Ambient temperature 10 to 32.2°C (50 to 90°F)

Storage temperature

-40 to 43.3°C (-40 to 110°F)

•

Allow the following recommended amount of space around the printer for proper ventilation:

Top

330 mm (13 in.)

Right side 152 mm (6 in.)

Front

381 mm (15 in.)

Left side

457 mm (18 in.)

Rear

203 mm (8 in.)

Printer conﬁgurations

CAUTION—TIPPING HAZARD:

Installing one or more options on your printer or MFP may require a

caster base, furniture, or other feature to prevent instability causing possible injury. For more information
on supported conﬁgurations, see

www.lexmark.com/multifunctionprinters

You can conﬁgure your printer by adding an optional 2200

‑

sheet tray or a combination of up to three optional

550

‑

sheet trays or envelope trays.

Learning about the printer

Summary of Contents for XC6152














































































































































































































































































































Search results

Summary of Contents for XC6152

Reviews:

Related manuals for XC6152

Brands by name

Popular brands

Lexmark XC6152, User Manual

Search results

Summary of Contents for XC6152

Reviews:

Related manuals for XC6152

Brands by name

Popular brands