Lexmark 6500E User Manual Download Page 307

Page: 307 / 337

AKE

SURE

THE

PRINT

CARTRIDGE

NOT

LOW

TONER

When

88.xx [color] cartridge low

appears, make sure the toner is distributed evenly within the print

cartridge:

Remove the print cartridge.

Warning—Potential Damage:

Be careful not to touch the photoconductor drum. Doing so may affect the print

quality of future print jobs.

Firmly shake the cartridge side-to-side and front-to-back several times to redistribute the toner.

Reinsert the print cartridge.

If the problem continues, the printer may need to be serviced. For more information, contact Customer Support.

Streaked horizontal lines appear on prints

ABCDE
ABCDE
ABCDE

Try one or more of the following:

ELECT

ANOTHER

TRAY

FEEDER

•

From the scanner control panel Paper Menu, select Default Source.

•

For Windows users, select the paper source from Print Properties.

•

For Macintosh users, select the paper source from the Print dialog and pop

‑

up menus.

AKE

SURE

THERE

WORN

DEFECTIVE

EMPTY

PRINT

CARTRIDGE

Replace the worn, defective, or empty print cartridge.

Troubleshooting

307

Summary of Contents for 6500E


















































































































































































































































































































































Search results

Summary of Contents for 6500E

Reviews:

Brands by name

Popular brands

Lexmark 6500E, User Manual

Search results

Summary of Contents for 6500E

Reviews:

Brands by name

Popular brands