Lexmark 6500E User Manual Download Page 306

Page: 306 / 337

Solid color or black pages appear on prints

AKE

SURE

THE

PRINT

CARTRIDGES

ARE

INSTALLED

CORRECTLY

ARE

NOT

DEFECTIVE

AND

NOT

LOW

TONER

•

Remove the print cartridges.

Warning—Potential Damage:

Be careful not to touch the photoconductor drum. Doing so may affect the print

quality of future print jobs.

•

Reinsert the print cartridges.

Note:

If the quality does not improve, replace the print cartridges.

•

If the problem continues, the printer may need to be serviced. For more information, contact customer support.

Black or white streaks appear on transparencies or paper

Try one or more of the following:

NSURE

THAT

THE

FILL

PATTERN

CORRECT

If the fill pattern is incorrect, choose a different fill pattern from your software program.

HECK

THE

PAPER

TYPE

•

Use only the recommended transparencies.

•

Ensure that the Paper Type setting matches what is loaded in the tray or feeder.

•

Ensure that the Paper Texture setting is correct for the type of paper or specialty media loaded in the tray or
feeder.

Troubleshooting

306

Summary of Contents for 6500E


















































































































































































































































































































































Search results

Summary of Contents for 6500E

Reviews:

Brands by name

Popular brands

Lexmark 6500E, User Manual

Search results

Summary of Contents for 6500E

Reviews:

Brands by name

Popular brands