manualshive.com logo in svg

Lexmark 6500E, User Manual

Share
Download
Lexmark 6500E User Manual Download Page 209

Menu item

Description

Sides (Duplex)

Off
Long edge
Short edge

Specifies how the text and graphics are oriented on the page

Notes:

•

Off is the factory default setting.

•

Long edge assumes binding along the long edge of the page (left edge for
portrait and top edge for landscape).

•

Short edge assumes binding along the short edge of the page (top edge for
portrait and left edge for landscape).

JPEG Quality

Best for content
5–90

Sets the quality of a JPEG photo image in relation to file size and the quality of the
image

Notes:

•

“Best for content” is the factory default setting.

•

5 reduces the file size, but reduces the quality of the image.

•

90 provides the best image quality, but the file size is increased.

•

This menu setting applies to all scan functions.

Text Default

5–90

Sets the quality of the text in relation to file size and the quality of the image

Note: 

75 is the factory default setting.

Text/Photo Default

5–90

Sets the quality of a text/photo image in relation to file size and the quality of the
image

Note: 

75 is the factory default setting.

Photo Default

5–90

Sets the quality of a photo image in relation to file size and the quality of the image

Note: 

50 is the factory default setting.

Use Multi

‑

Page TIFF

On
Off

Provides a choice between saving scan jobs into single-page TIFF files or
multiple

‑

page TIFF files. For a multiple-page scan

‑

to

‑

fax job, either one TIFF file is

created containing all the pages, or multiple TIFF files are created with one file for
each page of the scan job.

Notes:

•

On is the factory default setting.

•

This menu setting applies to all scan functions.

Transmission Log

Print log
Do not print log
Print only for error

Specifies whether a transmission log is printed

Note: 

Print log is the factory default setting.

Log Paper Source

Tray [x]
Manual Feeder

Specifies a paper source when printing FTP logs

Note: 

Tray 1 is the factory default setting.

Log Output Bin

Standard Bin
Bin [x]

Specifies the exit bin where fax logs are printed

Note: 

[x] can be any number between 1 and 10 if the appropriate optional exit bins

are installed.

Understanding printer menus

209

Summary of Contents for 6500E


















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands