manualshive.com logo in svg

Lexmark 6500E, User Manual

Share
Download
Lexmark 6500E User Manual Download Page 272

Restore Held Jobs?

Try one or more of the following:

•

Touch 

Restore

 to restore all held jobs stored on the scanner hard disk.

•

Touch 

Do not restore

 if you do not want any print jobs to be restored.

Scan document too long

The scan job exceeds the maximum number of pages. Touch 

Cancel job

 to clear the message and cancel the scan job.

Scanner automatic feeder cover open

Close the ADF cover.

Scanner locked, release lock under scanner

1

Unlock the scan bar.

2

Touch 

Continue

 to clear the message and continue scanning.

Some held jobs were not restored

Touch 

Continue

 to delete the specified job.

Note: 

Held jobs that are not restored stay on the hard disk and are inaccessible.

Unsupported disk

An unsupported disk has been inserted. Remove the unsupported disk, and then install a supported one.

Tray [x] paper size unsupported

The paper size in the specified tray is unsupported. Replace it with a supported paper size.

Troubleshooting

272

Summary of Contents for 6500E


















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands