4
Remove the indicated tray.
5
Reattach the tray.
6
Connect the power cord to a properly grounded electrical outlet.
7
Turn the printer back on.
If the error occurs again, then:
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Remove the tray.
4
Contact customer support.
•
From the scanner control panel, touch
Continue
to clear the message and print without using the tray.
Close door or insert cartridge
The cartridge is missing or not installed correctly. Insert the cartridge and close all doors and covers.
Close finisher side door
Close the side door of the finisher.
Disk corrupted
The scanner attempted a hard disk recovery on a corrupted scanner hard disk, and the hard disk cannot be repaired.
The hard disk must be reformatted.
Touch
Format disk
to reformat the hard disk and clear the message.
Note:
Formatting deletes all the files stored on the hard disk.
Disk full, scan job canceled
The scan job cannot continue because there is insufficient disk space.
Touch
Continue
to clear the message.
Disk near full. Securely clearing disk space.
Try one or more of the following:
•
Touch
Continue
to clear the message and continue printing.
•
Delete fonts, macros, and other data stored on the scanner hard disk.
•
Install a hard disk with higher capacity.
Error reading USB drive. Remove USB.
An unsupported USB device has been inserted. Remove the USB device, and then install a supported one.
Troubleshooting
264
