manualshive.com logo in svg

Lexmark 6500E, User Manual

Share
Download
Lexmark 6500E User Manual Download Page 224

Menu item

Description

Format Flash

Yes
No

Formats the flash memory

Warning—Potential Damage: 

Do not turn off the scanner while the flash memory

is being formatted.

Notes:

•

Yes deletes all data stored in flash memory.

•

No cancels the format request.

•

Flash memory refers to the memory added by installing a flash memory option
card in the scanner.

•

A flash memory option card must be installed in the scanner and operating
properly for this menu item to be available.

•

The flash memory option card must not be read/write

‑

 

or write

‑

protected.

Delete Downloads on Disk

Delete Now
Do Not Delete

Removes downloads from the scanner hard disk, including all held jobs, buffered jobs,
and parked jobs

Notes:

•

Delete Now configures the scanner control panel to return to the originating
screen after the deletion process is completed.

•

Do Not Delete sets the scanner control panel to return to the main Utilities
menu.

Activate Hex Trace

Assists in isolating the source of a print job problem

Notes:

•

When activated, all data sent to the scanner is printed in hexadecimal and
character representation, and control codes are not executed.

•

To exit or deactivate Hex Trace, turn the scanner off or reset the scanner.

Coverage Estimator

Off
On

Provides an estimate of the percentage coverage of toner on a page. The estimate is
printed on a separate page at the end of each print job.

Note: 

Off is the factory default setting.

XPS menu

Menu item

Description

Print Error Pages

Off
On

Prints a page containing information on errors, including XML markup errors

Note: 

Off is the factory default setting.

PDF menu

Menu item

Description

Scale to Fit

No
Yes

Scales page content to fit the selected paper size

Note: 

No is the factory default setting.

Understanding printer menus

224

Summary of Contents for 6500E


















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands