LevelOne IES-2881, User Manual

Page: 99 / 162

User Manual Page 99
switch_a(config)#interface fe1
switch_a(config-if )#
2.
Usage:
Use this command to specify the ingress/egress rate to be used for each interface. The
bandwidth value is in bits.
Use the no parameter with this command to remove the ingress/egress rate to be used for
each interface.
3.
Command Syntax:
(no) rate-control ingress/egress VALUE
VALUE
<1-10000000000 bits> (usable units: k, m, g)
<1-999>k|m for 1 to 999 kilo bits or mega bits.
1g for 1 giga bits.
4.
Example:
The following example shows the use of rate-control ingress VALUE ( 10 mega bits ) to the
interface fe1 (port 1):
switch_a(config)#interface fe1
switch_a(config-if )#rate-control ingress 10m
switch_a(config-if )#
RMON Statistics
1. Command Mode: Exec mode or Privileged Exec mode
Logon to Exec Mode (View Mode) or Privileged Exec Mode (Enable Mode).
The
switch_a> or switch_a# prompt will show on the screen.
switch_a>
switch_a#
2.
Usage:
Use the show interface statistics command to display RMON statistics of interface.
3.
Command Syntax:
show interface statistics IFNAME
IFNAME specifies the name of the interface for which RMON statistics is desired.
4.
Example:
The following example shows the use of show interface statistics to display RMON
statistics of the interface fe1 (port 1):
switch_a>show interface statistics fe1