LevelOne IES-2881, User Manual

Page: 149 / 162

User Manual Page 149
4.
Example:
The following example configures a maximum response time of 8 seconds on vlan1.1 :
switch_a(config)#interface vlan1.1
switch_a(config-if )#ip igmp query-max-response-time 8
switch_a(config-if )#
IGMP passive snooping:
Static mc router port:
1.
Command Mode: Interface mode
Logon to Configure Mode (Configure Terminal Mode).
Then logon to Interface mode.
vlan1.1 means vlan 1.
The
switch_a(config-if)# prompt will show on the screen.
switch_a(config)#interface vlan1.1
switch_a(config-if )#
2.
Usage:
Use ip igmp snooping mrouter interface command to statically configure the specified
VLAN constituent interface as a multicast router interface for IGMP Snooping in that VLAN.
Use the
no ip igmp snooping mrouter interface command to remove the static
configuration of the interface as a multicast router interface.
3.
Command Syntax:
(no) ip igmp snooping mrouter interface IFNAME
IFNAME Specify the name of the interface
4.
Example:
The following example shows interface fe1 (port 1) statically configured to be a multicast
router interface on
vlan1.1 :
switch_a(config)#interface vlan1.1
switch_a(config-if )#ip igmp snooping mrouter interface fe1
switch_a(config-if )#
IGMP passive snooping:
Report suppression:
1.
Command Mode: Interface mode
Logon to Configure Mode (Configure Terminal Mode).
Then logon to Interface mode.
vlan1.1 means vlan 1.
The
switch_a(config-if)# prompt will show on the screen.
switch_a(config)#interface vlan1.1
switch_a(config-if )#