User Manual
Page 106
Trunking
Port Trunking
Port Trunking
1.
Command Mode: Interface mode
Logon to Configure Mode (Configure Terminal Mode).
Then logon to Interface mode.
fe1 means port 1.
The
switch_a(config-if)#
prompt will show on the screen.
switch_a(config)#interface fe1
switch_a(config-if )#
2.
Usage:
Use
static-channel-group
command to create a static aggregator, or add a member port
to an already-existing static aggregator.
Use the
no static-channel-group
command to detach the port from the static
aggregator.
3.
Command Syntax:
static-channel-group <1-8>
no static-channel-group
<1-8> Channel group number.
Maximum 8 ports in static-channel-group 1 to 6.
Maximum 4 ports in static-channel-group 7 and 8.
4.
Example:
The following example adding the interface fe1 (port 1) to
static-channel-group 1
:
switch_a(config)#interface fe1
switch_a(config-if )#static-channel-group 1
switch_a(config-if )#
Summary of Contents for IES-2881
