LevelOne IES-2881, User Manual

Page: 91 / 162

User Manual Page 91
The following example sets the default gateway 192.168.1.254 to switch:
switch_a(config)#ip default-gateway 192.168.1.254
switch_a(config)#
Save Configuration
Load config from TFTP server:
1.
Command Mode: Privileged Exec mode
Logon to Privileged Exec Mode (Enable Mode).
The
switch_a# prompt will show on the screen.
switch_a#
2.
Usage:
Use install image command to load configuration file from tftp server to switch.
3.
Command Syntax:
install image IP-ADDRESS WORD
IP-ADDRESS specifies the IP address of tftp server.
WORD specifies the file name to be loaded to switch.
4.
Example:
The following example specifies upgrading firmware (file name: flash.tgz ) from tftp server
(IP address: 192.168.1.100) to switch:
switch_a#install image 192.168.1.100 flash.tgz
switch_a#
Load config to TFTP server:
1.
Command Mode: Privileged Exec mode
Logon to Privileged Exec Mode (Enable Mode).
The
switch_a# prompt will show on the screen.
switch_a#
2.
Usage:
Use write config-file command to backup configuration file to tftp server.
3.
Command Syntax:
write config-file IP-ADDRESS
IP-ADDRESS specifies the IP address of tftp server.
4.
Example:
The following example backups configuration file to tftp server (IP address: 192.168.1.20) :
switch_a#write config-file 192.168.1.20
switch_a#