LevelOne IES-2881, User Manual

Page: 150 / 162

User Manual Page 150
2.
Usage:
Use ip igmp snooping report-suppression command to enable report suppression for
IGMP versions 1 and 2.
Use the
no ip igmp snooping report-suppression command to disable report
suppression.
3.
Command Syntax:
(no) ip igmp snooping report-suppression
4.
Example:
The following example enables report suppression for IGMPv2 reports on vlan1.1 :
switch_a(config)#interface vlan1.1
switch_a(config-if )#ip igmp version 2
switch_a(config-if )#ip igmp snooping report-suppression
switch_a(config-if )#
NTP
NTP Status:
1.
Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The
switch_a(config)# prompt will show on the screen.
switch_a(config)#
2.
Usage:
Use ntp enable command to enable NTP for the Switch.
Use no ntp enable command to disable NTP for the Switch.
3.
Command Syntax:
(no) ntp enable
4.
Example:
The following example enables NTP for the Switch:
switch_a(config)#ntp enable
switch_a(config)#
NTP Server:
1.
Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The
switch_a(config)# prompt will show on the screen.
switch_a(config)#
2.
Usage:
Use this command to specify the IP address or Domain name of NTP server.