LevelOne IES-2881, User Manual

Page: 73 / 162

User Manual Page 73
drop- . Ports in the GVRP active
applicant state send GVRP VLAN declarations when they are in the STP (Spanning Tree
Protocol) blocking state, which prevents the STP bridge protocol data units (BPDUs)
from being pruned from the other port. Ports in the GVRP normal applicant state do
not declare GVRP VLANs when in the STP blocking state.
3. GVRP registration: GVRP registration - GVRP registration
drop- GVRP registration to
the port. Configuring an IEEE802.1Q trunk port in registration mode allows dynamic
creation (if dynamic VLAN creation is enabled), registration, and deregistration of
VLANs on the trunk port.
4.
IGMP Snooping
1. - -down list to
. Disable: Disable IGMP on the
switch. Passive: The switch with only multicast-data-forwarding capability. Querier: The
switch acts as the querier for the network. There is only one querier on a network at
any time.
2.
3. VLAN ID: - -down list to choose
the VLAN under configuration for the switch.
4. IGMP version: - -down
.
5. Fast-leave: - - - -down list to
. Enable this function will allow members of a
multicast group to leave the group immediately when an IGMP Leave Report Packet is
received by the Switch.
IGMP querier:
1.
Query-interval: uery-interval