LevelOne IES-2881, User Manual

Page: 7 / 162

User Manual Page 7
Terminal Block Power Input
+48VDC -48VDC 88-370VDC 90-264VAC
0 -48 0 N
+ +48 0 88-370 L
Earth Ground
Protect Ground
<Note> Dielectric withstand (Hipot) test for DC power input, must remove metal chip between Earth
Ground and Protect Ground of the terminal block power input to avoid damage to the Switch.
Console Configuration

Connect to the switch console:
Connect the DB9 straight cable to the RS-232 serial port of the device and the RS-232
serial port of the terminal or computer running the terminal emulation application.
Direct access to the administration console is achieved by directly connecting a
terminal or a PC equipped with a terminal-emulation program (such as HyperTerminal)
to the switch console port.

Configuration settings of the terminal-emulation program:
Baud rate: 115,200bps
Data bits: 8
Parity: none
Stop bit: 1
Flow control: none

Line Interface (CLI) screen should appear as below:

Logon to Exec Mode (View Mode):

Logon to Privileged Exec Mode (Enable Mode):
screen.

Logon to Configure Mode (Configure Terminal Mode):