LevelOne IES-0883, User Manual

Page: 8 / 152

IES-0883 User Manual Page 7
l
Logon to Privileged Exec Mode (Enable Mode):
At the “switch_a>” prompt just type in “enable” and press <Enter> to logon to
Privileged Exec Mode (or Enable Mode). And the “switch_a#” prompt will show on the
screen.
l
Logon to Configure Mode (Configure Terminal Mode):
At the “switch_a#” prompt just type in “configure terminal” and press <Enter> to logon
to Configure Mode (or Configure Terminal Mode). And the “switch_a(config)#” prompt
will show on the screen.
l
Set new IP address and subnet mask for Switch:
At the “switch_a(config)#” prompt just type in “interface vlan1.1” and press <Enter> to
logon to vlan 1 (vlan1.1 means vlan 1). And the “switch_a(config-if)#” prompt will show
on the screen.
Command Syntax: “ip address A.B.C.D/M”. “A.B.C.D” specifies IP address. “M” specifies IP
subnet mask. “M”= 8: 255.0.0.0, 16:255.255.0.0, or 24: 255.255.255.0.
For example, At the “switch_a(config-if)#” prompt just type in “ip address
192.168.1.10/24” and press <Enter> to set new IP address (192.168.1.10) and new IP
subnet mask (255.255.255.0) for Switch.