IES-0883 User Manual
Page 99
GROUP <1-1> The ID of the bridge group to which this hello time is assigned.
HELLOTIME <1-9> The hello BPDU interval in seconds.
4.
Example:
The following example sets the
hello-time
HELLOTIME (
9
) of bridge GROUP (
1
):
switch_a(config)#bridge 1 hello-time 9
switch_a(config)#
Max Age (sec) (6..28):
1.
Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The
switch_a(config)#
prompt will show on the screen.
switch_a(config)#
2.
Usage:
Use this command to set the max-age for a bridge.
Use the no parameter with this command to restore the default value of max-age.
3.
Command Syntax:
bridge GROUP max-age MAXAGE
no bridge GROUP max-age
GROUP <1-1> The ID of the bridge group to which this maximum age time is assigned.
MAXAGE <6-28> The maximum time, in seconds, to listen for the root bridge.
4.
Example:
The following example sets the
max-age
MAXAGE (
28
) of bridge GROUP (
1
):
switch_a(config)#bridge 1 max-age 28
switch_a(config)#
Forward Delay (sec) (4..30):
1.
Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The
switch_a(config)#
prompt will show on the screen.
switch_a(config)#
2.
Usage:
Use this command to set the time (in seconds) after which (if this bridge is the root bridge)
each port changes states to learning and forwarding.
Use the no parameter with this command to restore the default value.
3.
Command Syntax:
bridge GROUP forward-time FORWARD_DELAY
no bridge GROUP forward-time
Summary of Contents for IES-0883
Page 1: ...IES 0883 6 GE 2 SFP Managed Switch 20 to 60C DIN rail User Manual v1 00 1206 ...
Page 37: ...IES 0883 User Manual Page 36 Reboot Reboot Click Reboot button to restart the switch ...
Page 38: ...IES 0883 User Manual Page 37 Logout Logout Click Logout button to logout of the switch ...
Page 152: ...IES 0883 User Manual Page 151 ...