Barcode tape
Leuze
electronic
34
BPS 34
Leuze electronic
Figure 6.7:
"MVS" control barcode for switching between tapes
Use of the "MVS" control barcode for switching between tapes is not dependent on direction.
This means that it functions for switching from tape 1 to tape 2 and vice versa.
Figure 6.8:
Switching position with the "MVS" control barcode
If the "MVS" label is passed over, the new tape value is always output relative to the centre
of the device or label (see figure 6.8). In this situation, the hysteresis of ±5 mm is irrelevant.
If, however, the device is stopped within the hysteresis on the "MVS" label and the direction
changed, the starting position values have an inaccuracy ±5 mm.
SM1
MVS
08504
8500
1808
BPS centre
+ hysteresis
± 5 mm
Centre of
control label
Scanning beam
Direction of movement
Measurements
Positions values
