Barcode tape
Leuze
electronic
36
BPS 34
Leuze electronic
Important note for printing:
1.
Select only those pages that are actually required.
2.
Change the printer settings so that the code is not distorted.
Suggestion
for printer settings, see figure 6.9.
3.
Verify the printing result by measuring the distance between two codes (see
figure 6.10).
4.
Cut the code strips and concatenate them. It is important that the code content
always increases or decreases in blocks of 4 cm.
Figure 6.9:
Printer settings for BCT repair kit
Figure 6.10: Checking the print results of the BCT repair kit
000020
000024
000028
000032
000036
40 mm
