123
COMMISSIONING MANUAL
POWERDRIVE MD
Variable speed drive
MENUS AND DIAGRAMS IN ADVANCED SET UP MODE
LEROY-SOMER
3871 en - 2011.05 / h
: Latch 1 output destination
Adjustment range :
00.00
to
21.51
Factory setting
:
00.00
This parameter is used to select the destination of the output
of latching relay 1.
Only "bit" type parameters can be assigned to this output. If
an unsuitable parameter is addressed, the output will be
frozen at 0.
: Not used
: Latch 2 output
Adjustment range : Disabled (0) or Enabled (1)
This parameter indicates the state of the output of latching
relay 2.
: Latch 2 ON source
Adjustment range :
00.00
to
21.51
Factory setting
:
00.00
This parameter is used to select the enable source for
latching relay 2. A pulse on the input causes the output to
change to Enabled (1).
Only "bit" type parameters can be assigned to this input. If an
unsuitable parameter is addressed, the input will be frozen at 0.
: Latch 2 OFF source
Adjustment range :
00.00
to
21.51
Factory setting
:
00.00
This parameter is used to select the disable source for
latching relay 2. A pulse on the input causes the output to
change to Disabled (0).
Only "bit" type parameters can be assigned to this input. If an
unsuitable parameter is addressed, the input will be frozen at
0.
to
: Not used
: Latch 2 output destination
Adjustment range :
00.00
to
21.51
Factory setting
:
00.00
This parameter is used to select the destination of the output
of latching relay 2.
Only "bit" type parameters can be assigned to this output. If
an unsuitable parameter is addressed, the output will be
frozen at 0.
: Latch 3 output
Adjustment range : Disabled (0) or Enabled (1)
This parameter indicates the state of the output of latching
relay 3.
: Latch 3 ON source
Adjustment range :
00.00
to
21.51
Factory setting
:
00.00
This parameter is used to select the enable source for
latching relay 3. A pulse on the input causes the output to
change to Enabled (1).
Only "bit" type parameters can be assigned to this input. If an
unsuitable parameter is addressed, the input will be frozen
at 0.
: Latch 3 OFF source
Adjustment range :
00.00
to
21.51
Factory setting
:
00.00
This parameter is used to select the disable source for
latching relay 3. A pulse on the input causes the output to
change to Disabled (0).
Only "bit" type parameters can be assigned to this input. If an
unsuitable parameter is addressed, the input will be frozen at
0.
to
: Not used
: Latch 3 output destination
Adjustment range :
00.00
to
21.51
Factory setting
:
00.00
This parameter is used to select the destination of the output
of latching relay 3.
Only "bit" type parameters can be assigned to this output. If
an unsuitable parameter is addressed, the output will be
frozen at 0.
: Not used
: Latch 4 output
Adjustment range : Disabled (0) or Enabled (1)
This parameter indicates the state of the output of latching
relay 4.
: Latch 4 ON source
Adjustment range :
00.00
to
21.51
Factory setting
:
00.00
This parameter is used to select the enable source for
latching relay 4. A pulse on the input causes the output to
change to Enabled (1).
Only "bit" type parameters can be assigned to this input. If an
unsuitable parameter is addressed, the input will be frozen at 0.
: Latch 4 OFF source
Adjustment range :
00.00
to
21.51
Factory setting
:
00.00
This parameter is used to select the disable source for
latching relay 4. A pulse on the input causes the output to
change to Disabled (0).
Only "bit" type parameters can be assigned to this input. If an
unsuitable parameter is addressed, the input will be frozen at 0.
to
: Not used
: Latch 4 output destination
Adjustment range :
00.00
to
21.51
Factory setting
:
00.00
This parameter is used to select the destination of the output
of latching relay 4.
Only "bit" type parameters can be assigned to this output. If
an unsuitable parameter is addressed, the output will be
frozen at 0.
to
: Not used
16.49
16.50
16.51
16.52
16.53
16.54
16.58
16.59
16.61
16.62
16.63
16.64
16.68
16.69
16.70
16.71
16.72
16.73
16.74
16.78
16.79
16.80
16.89