Lepu Medical AIView 12V, Operator'S Manual, Page: 91 / 292

7-13
7.6 About Arrhythmia Monitoring
Arrhythmia monitoring is intended for adult, pediatric and neonatal
patients.
7.6.1 Safety Information
Warning
If you switch off all the arrhythmias alarms, the monitor cannot give any
arrhythmias alarm when that situation occurs. This may result in a hazard
to the patient. Keep the patient under close surveillance.
Warning
Heart rate reading may be affected by cardiac arrhythmias. Do not rely
entirely on heart rate alarms when monitoring patients with arrhythmias.
Always keep these patients under close surveillance.
Caution
The priority of lethal arrhythmia alarms is always high. It cannot be
changed.

Note
Because arrhythmia detection needs a template ECG waveform as
reference which is a piece of normal ECG waveform with regular rhythm
and stable amplitude, it is necessary to re-activate the template learning
when the patient is changed, or the arrhythmia detection is incorrect. For
stronger arrhythmia detection, it is recommended to wait for a clean and
stable ECG waveform before starting ARR detection during the monitoring.

Note
During arrhythmia detection, incorrect detection might occur if the
non-ECG waveforms (e.g., square or triangle waveform) appear.

Note
Before starting the 1mV calibration signal, please turn off the arrhythmia
detection.

Note
During Arrhythmia detection, the template learning is very important. The
device requires a group of stable QRS complex waveforms to build up this
template. If the system detects Arrhythmia incorrectly, please re-activate
the template learning and obtain the correct template.