Lepu Medical AIView 12V, Operator'S Manual, Page: 128 / 292

11-9
11.6.2 Changing the SpO
2
Alarm Settings
To set SpO
2
alarm options, follow the steps below:
1. Enter the SpO
2
alarms setup screen in either of the following
ways:

Select the SpO
2
parameter area
→
press the [Alarms]
button.

Press the [Alarms] quick key
→
select the [SpO
2
] tab.

Press[Main Menu]
→
[Alarms]
→
select the [SpO
2
] tab.
2. Set alarm properties as desired.
Caution
The SpO
2
Desat (desaturation) alarm cannot be switched off by default.
11.6.3 Setting the Priority of the SpO
2
Sensor Off Alarm
To set the priority of the SpO
2
sensor off alarm, follow the steps
below:
1. Press[Main Menu]
→
[Maintenance]
→
input password
→
press
[Enter].
2. Select the [Alarm] tab.
3. Set [SpO
2
Sensor Off] from the drop-down menu.
Options: High, Med, Low. The default is Low.
11.7 Changing PR Settings
11.7.1 Changing the PR Alarm Settings
To set PR alarm options, follow the steps below:
1. Enter the PR alarms setup screen in either of the following
ways:

Press the [Alarms] quick key
→
select the [SpO
2
] tab.

Press [Main Menu]
→
[Alarms]
→
select the [PR] tab.
2. Set alarm properties as desired.
[Alarm Source]: options: Auto, HR, PR, HR + PR. The default is
Auto.
11.7.2 Setting the PR Source
To set which parameter is used as a PR source, follow the steps
below:
1. Enter the SpO
2
setup screen. For the specific operation method,
refer to 11.6.1 Setting SpO2 Menu .