Lepu Medical AIView 12V, Operator'S Manual, Page: 269 / 292

B-3
Alarm Category Alarm Messages Default Priority
PR Pulse not found High
CO
2
Apnea High
Note: ―XX‖ represents a measurement or parameter label, such as
HR, ST, RR, SpO
2
or PR, etc.
B.2 Technical Alarm Messages
Default
Priority Alarm
Source
Alarm Messages
High
System Battery low, unknown error
CO
2
CO
2
sensor failure, CO
2
sensor temperature too
high
Medium
ECG / SpO
2
Lead(s) off, Probe off
CO
2
CO
2
sensor off, Zero required, CO
2
out of range,
check airway adapter, check sampling line, zero
failed (in zero operation window)
Low
NIBP
Self test failed, system error, measurement
timeout, signal weak, cuff error, air leakage,
pressure error, out of range, arm motion,
overpressure detected, signal saturation, test air
leakage
Temp Self test failed
B.3 Nellcor SpO
2
Alarm Messages
Default
Priority
Alarm Event Remarks
High
SpO
2
INOP
Such alarm will not display on alarm