Lepu Medical AIView 12V, Operator'S Manual, Page: 68 / 292

5-8
2. Select the [Alarm] tab.
3. Switch on the [Physio. Alarm Latch].
To release the physiological alarm latch, switch off the [Physio.
Alarm Latch].
Caution
When the alarm system is reset, latched physiological alarms are cleared.
5.10 Viewing Alarms
You can view the current alarm in the alarm information area at the
top of the screen. If the monitor has more than one physiological
(technical) alarm, you can see the physiological (technical) alarm list
by selecting the physiological (technical) alarm information area to
enter the alarm list window. The alarm information list shows all
currently active physiological or technical alarms, with the most
recent one at the top of the list.
5.11 Confirming Alarms
To confirm alarms, follow the steps below:
1. Select the technical or physiological alarm information area to
enter the technical or physiological alarm information window.
2. Select the check box(s) before one or more alarm messages.
3. Press [Alarm Confirm].
The monitor has the following features after the alarm is confirmed:

The alarm is silenced.

A symbol appears before the alarm message.

Technical alarms are changed to the prompt messages.
Press the [X] button on the right side of the confirmed alarm to
cancel the confirmation of the alarm.
After canceling the alarm confirmation, the alarm sound is activated
and the alarm confirmation symbol disappears.
5.12 Reviewing Alarms
In the technical or physiological alarm information window, press the
[Review] button to enter the alarm event review screen. For more
information, see
Chapter 16 Review .