Lepu Medical AIView 12V, Operator'S Manual, Page: 51 / 292

3-16
1. Press [Main Menu]
→
[System]
→
[System] to enter the system
setup screen.
2. Drag the slider to set [Key Volume], [Alarm Volume] and [Beat
Volume] respectively.
The volume is gradually increasing.
Caution
When the volume is set to 0, the sound is turned off. It is not recommended
to set the alarm volume and beat volume to 0 (Off). Pay attention to
potential risks.
3.11 General Operations
3.11.1 Configuring the Displayed Quick Keys
You can set which quick keys need to be displayed on the screen. To
do so, please refer to the following steps:
1. Access [Quick Keys] screen in either of the following ways:

Press the [Screens
] quick key → select the [Quick Keys]
tab.

Press [Main Menu]
→ [Screens], select the [Quick Keys]
tab.
2. Select a block location to display a certain quick key from the
top of this screen, and then select the quick key from the quick
key list. For example, to display the [Screens] quick key at the
first block, select the first block, and then select [Screens] from
the list.
3. Configure all the quick keys that need to be displayed on the
screen in the same way.
3.11.2 Switching On or Off a Parameter
You can manually switch on or off a parameter when its module is
configured. To do so, please refer to the following steps:
1. Access [Parameters On/Off] screen in either of the following
ways:

Press the [Screens
] quick key → select the [Parameters
On/Off] tab.

Press [Main Menu]
→ [Screens], select the [Parameters
On/Off] tab.
2. Enable or disable desired parameters.