Lepu Medical AIView 12V, Operator'S Manual, Page: 39 / 292

3-4

Note
The monitor can be used normally without any performance degradation
when the battery is being charged.

Note
It is better to recharge the battery after it has been used up, and the
charging time should be 13~15 hours long.
3.5 Turning on the Monitor
Press the power switch on the front panel of the monitor for about 3
seconds, the monitor automatically performs a self-test, then the
alarm tone sounds and the alarm lamps illuminate. This indicates
that the visible and audible alarm indicators function correctly. Then
the monitor jumps from the startup screen to the main screen. This
indicates that the monitor is started successfully.
Check all the applicable functions of the monitor to make sure that
the monitor works normally.
Warning
Before each use, check the device for safe and normal operation. Do not
use this device to monitor the patient if there are indications of damage or
reminders of error. Please contact your local distributor or the
manufacturer.

Note
The monitor runs on battery power without interruption when AC power is
unavailable.
3.6 Checking the Recorder/Printer
If your monitor is equipped with a recorder, open the recorder’s door
to check if paper is properly installed. If there is no paper, refer to
19.5 Loading Paper for the method of installing the recording paper.
If your monitor is not equipped with a recorder, you can print patient
reports through an external network printer. For more information
about network printer connection, refer to
20.2 Setting the Network
Printer .
3.7 Operating and Navigating
Everything you need to operate the monitor is contained on its
screen. Almost every element on the screen is interactive. Screen
elements include measurement data, waveforms, quick keys,