Lepu Medical AIView 12V, Operator'S Manual, Page: 48 / 292

3-13
The monitor has the following features after entering Private Mode:

No parameters and waveforms are displayed. The screen turns
blank.

Except for the low battery alarm, the monitor inactivates alarm
tones and alarm lights for all other alarms.
 All system sounds, including heart beat tone, pulse tone and
prompt tone, are muted.

Monitoring data and alarms are presented only at the CMS.
The monitor automatically exits the private mode in any of the
following situations:

The monitor disconnects from the CMS.
 The low battery alarm occurs.
Warning
In Private mode, all audible alarms are suppressed and the alarm light is
deactivated at the monitor. Alarms are presented only at the CMS. Please
pay attention to the potential risks.
Caution
You cannot enter the private mode if a low battery alarm occurs.
3.9.6 Suspend Monitoring Mode
If you just want to stop monitoring temporarily, you can set the
monitor to suspend monitoring.
To enter the Suspend Monitoring, follow the steps below:
1. Click [Main Menu]
→
[Screens]
→
[Work Mode]
2. Select [Suspend Monitoring].
3.
A confirmation dialog box ―Are you sure you want to enter
Suspend Monitoring mode?‖ pops up. Click [OK] to enter the
suspend monitoring mode, and click [Cancel] to stay in the
current screen.
The monitor has the following features after entering Suspend
Monitoring mode:
 The screen displays "Suspend Monitoring".

All alarms are automatically reset, and no new alarms occur.
 Patient information and alarm presets remain unchanged.
Click the [Restart monitoring] button on the screen to exit the
suspend monitoring mode.