Lepu Medical AIView 12V, Operator'S Manual

Page: 214 / 292

21-4
The battery power is low and needs to be charged.
When this icon appears, the battery can power the
monitor for up to 30 minutes.
The battery is almost depleted and needs to be charged
immediately. Otherwise, the monitor will automatically
shut down after 5 minutes.
The battery is being charged.
No battery is installed
21.4.3 Battery-related Alarms
When the battery is low, the ―Low battery‖ alarm will be triggered.
When the battery is almost depleted, the ―Battery depleted‖ alarm
will be triggered. In this case, immediately connect the AC power
supply to the monitor and charge the battery. Otherwise, the monitor
will automatically shut down soon.
For more information on battery-related alarms, see
Appendix B
Alarm Messages .
21.5 Charging the Battery
After the monitor is connected to AC power supply, it can
automatically charge the battery even though the monitor is turned
off.
21.6 Maintaining the Battery
21.6.1 Battery Optimization
The performance of the battery deteriorates over time. It is
recommended to optimize the battery every three months. If the
battery is not optimized for a long time, the battery capacity display
may be inaccurate, causing the incorrect judgment of remaining
battery runtime.
To optimize the battery, follow the steps below:
1. Disconnect the monitor from the patient and stop all monitoring
and measuring procedures.
2. Allow the battery to be charged uninterruptedly until it is fully
charged.