Lenze EVS9321-CS, Operating Instructions Manual

Page: 15 / 189

Technical data
3-2
BA9300SU EN 2.1
3.2 General data/ operating conditions
Field Values
Vibration resistance Germanischer Lloyd, general conditions
Permissible moisture Humidity class F without condensation
(average relative humidity 85 %)
Permissible temperature ranges during transport: -25 °C ... + 70 °C
during storage of the controller: -25 °C ... + 55 °C
during operation of the controller: 0 °C ... + 40 °C without derating
+ 40 °C ... + 55 °C with power derating (controllers 9321-9326)
+ 40 °C ... + 50 °C with power derating (controllers 9327-9332)
Permissible installation height h h
≤
1000 m a.m.s.l. without derating
1000 m a.m.s.l. < h
≤
4000 m a.m.s.l. with derating
Permissible pollution VDE 0110 part 2 pollution degree 2
Noise emission Requirements to EN 50081-2, EN 50082-1, EN 61800-3
Limit value class A to EN 55011 (industrial area) with mains filter A
Limit value class B acc. to EN 55022 (residential area) with mains filter B and installation in control cabinet
Noise immunity Limit values maintained using mains filter.
Requirements to EN 50082-2, EN 61800-3
Requirements
Standard Severity
Running time EN61000-4-2 3, i.e. 8 kV at air discharge and 6 kV at contact discharge
RF interference
(enclosure)
EN61000-4-3 3, i.e. 10 V/m; 27 to 1000 MHz
Burst EN61000-4-4 3/4, i.e. 2 kV/5 kHz
Surge IEC 1000-4-5 3, i.e. 1.2/50
µ
s, 1 kV Phase-Phase, 2 kV Phase-PE
Insulation strength Overvoltage category III to VDE 0110
Packaging to DIN 4180
9321 to 9332: Delivery packing
Type of protection IP20
IP41 on the heat-sink side for thermal separation (punching)
NEMA 1:
Protection against contact
Approvals CE: Low-Voltage Directive
UL508: Industrial Control Equipment
UL508C: Power Conversion Equipment