Configuration
Use of funktion blocks
2−37
l
EDSVF9383V−EXT EN 2.0
Building up connections
1. Determine the signal source for ARIT2−IN1:
– Use the arrow keys and go to the code level.
– Use
z
or
y
to select C0601/1.
– Press PRG to go to the parameter level.
– Use
z
or
y
to select the output AIN2−OUT (selection number 55).
– Confirm with SH + PRG.
– Press PRG to go back to the code level.
2. Determine the signal source for ARIT2−IN2:
– Use
z
to select C0601/2.
– Press PRG to go to the parameter level.
– Use
z
or
y
to select the output AIN2−OUT (selection number 55).
– Confirm with SH + PRG.
– Press PRG to go back to the code level.
3. Parameterise ARIT2:
– Use
y
to select C0600.
– Press PRG to go to the parameter level.
– Select multiplication (selection number 3).
– Confirm with SH + PRG.
– Press PRG to go back to the code level.
4. Determine the signal source for AOUT1:
– Use
y
to select C0431.
– Press PRG to go to the parameter level.
– Select output ARIT2−OUT (selection number 5505).
– Confirm with SH + PRG.
– Press PRG to go back to the code level.
5. Enter function block ARIT2 into the processing table:
– Use
z
to select C0465 and subcode 8.
– Press PRG to go to the parameter level.
– Enter function block ARIT2 (selection number 5505).
– Confirm with SH + PRG.
– Press PRG to go back to the code level.
– This determines the order of FB processing.