Lenovo ThinkStation P920 Hardware Maintenance Manual Download Page 85

Page: 85 / 246

Creating a RAID volume

Attention:

All the existing data stored on the selected drives will be erased while the RAID volume is being

created.

To create a RAID volume, do the following:

1. Start the Setup Utility program. See “Starting the Setup Utility program” on page 67.

2. Select

Advanced

➙

AVAGO MegaRAID Configuration Utility

and press Enter.

3. Select

Main Menu

and press Enter.

4. Select

Configuration Management

and press Enter.

5. Select

Create Virtual Drive

and press Enter.

6. Select and configure the options one by one.

Select RAID Level

: You can set the RAID level to one of the following:

•

RAID0

•

RAID1

•

RAID5

•

RAID6

•

RAID00

•

RAID10

Note:

Some of the RAID levels might not be displayed because the number of installed SATA

storage drives and the model of the AVAGO MegaRAID adapter vary.

Select Drives From

: Select

Unconfigured capacity

Free capacity

depending on your needs and

press Enter.

Select Drives

: Select a storage drive and press Enter. After selecting all storage drives for creating

the RAID volume, select

Apply Changes

and press Enter. When promoted, select

Confirm

and

press Enter. Then, select

Yes

and press Enter to save the storage drive selection. Finally, select

and press Enter.

Virtual Drive Name

: You can type a preferred name for the volume name.

Strip Size

(if applicable): Select a strip size and press Enter.

7. Select

Save Configuration

and press Enter. When promoted, select

Confirm

and press Enter. Then,

select

Yes

and press Enter to confirm the creation of the RAID volume.

8. To save settings and exit the Setup Utility program, press F10 or Fn+F10 (depending on the keyboard

settings), select

Yes

in the window displayed, and press Enter.

Viewing the information about a RAID volume

To view the information about a RAID volume, do the following:

1. Start the Setup Utility program. See “Starting the Setup Utility program” on page 67.

2. Select

Advanced

➙

AVAGO MegaRAID Configuration Utility

and press Enter.

3. Select

Main Menu

and press Enter.

4. Select

Virtual Drive Management

and press Enter.

5. Select a RAID volume and press Enter to view the detailed information.

Deleting a RAID volume

Attention:

All the existing data stored on the selected drives will be erased after you delete RAID volumes.

Chapter 6

Advanced configuration

Summary of Contents for ThinkStation P920























































































































































































































































Search results

Summary of Contents for ThinkStation P920

Reviews:

Lenovo ThinkStation P920, Hardware Maintenance Manual, Page: 85 / 246

Search results

Summary of Contents for ThinkStation P920

Reviews: