Lenovo ThinkStation P920, Hardware Maintenance Manual, Page: 193 / 246

6. To install a slim optical drive, do the following:
a. If no slim optical drive has been installed in the flex module before, press the two metal clips 1 to
remove the plastic clip with the two screws as shown. Remove the two screws.
Figure 147. Removing the plastic clip with the two screws
b. Install the two screws to secure the plastic clip on the rear of the new slim optical drive.
Figure 148. Installing the plastic clip to the slim optical drive
c. Slide the new slim optical drive with the plastic clip into the flex module until the slim optical drive
snaps into position.
Figure 149. Installing the slim optical drive in the flex module
7. Position the flex module cover on the flex module. Ensure that the rail guides on the bottom of the flex
module cover engage the rails on the flex module. Then, push the cover to the front of the flex module
until it snaps into position.
Chapter 9
.
Hardware removal and installation
185