Lenovo ThinkStation P920 Hardware Maintenance Manual Download Page 49

Page: 49 / 246

Depending on your computer model, the following parts might be preinstalled in the flex module:

– 15-in-1 card reader

– External Serial Advanced Technology Attachment (eSATA) connector

– Institute of Electrical and Electronics Engineers (IEEE) 1394 connector

– Slim optical drive

– Front Thunderbolt adapter kit

• Front-access storage enclosure

• Multi-drive conversion kit

Depending on your computer model, the following parts might be preinstalled in the multi-drive
conversion kit:

– Hard disk drive

– Slim optical drive

• Optical drive

• Slim-optical-drive adapter

Storage drive bays (2)

You can install hard disk drives, solid-state drives, or hybrid drives in the storage drive bays.

Optional storage drive bays (2)

If you want to install storage drives into the

optional storage drive bays, contact the Lenovo Customer

Support Center for help.

PCIe card slots (8)

You can install compatible PCIe cards and PCIe solid-state drives in the PCIe card slots.

Chapter 2

Product overview

Summary of Contents for ThinkStation P920























































































































































































































































Search results

Summary of Contents for ThinkStation P920

Reviews:

Lenovo ThinkStation P920, Hardware Maintenance Manual, Page: 49 / 246

Search results

Summary of Contents for ThinkStation P920

Reviews: