Lenovo ThinkStation P920, Hardware Maintenance Manual, Page: 48 / 246

Internal storage drives
Internal storage drives are devices that your computer uses to read and store data. You can add drives to
your computer to increase storage capacity and enable your computer to read other types of media. Internal
storage drives are installed in bays.
When you install or replace an internal storage drive, note the type and size of the drive that each bay
supports and correctly connect the required cables. Refer to the appropriate section in Chapter 9 “Hardware
removal and installation” on page 103 for instructions on how to install or replace internal storage drives for
your computer.
The following illustration shows the locations of the storage drive bays.
Note: The computer hardware might look slightly different from the illustration.
Figure 7. Drive bay locations
1
M.2 solid-state drive slots (2)
2
SD card slot
3
Flex bays (3)
4
Storage drive bays (2)
5
Optional storage drive bays (2)
6
PCIe card slots (8)
1 M.2 solid-state drive slots (2)
One or two M.2 solid state drives are installed in some models.
2 SD card slot
An SD card is installed in some models.
3 Flex bays (3)
Depending on your computer model, the following devices might be installed in the flex bays:
• Flex module
40
P920 Hardware Maintenance Manual