Lenovo 30BG User Manual Download Page 85

Page: 85 / 146

Figure 34. Installing the 3.5-inch storage drive into the bracket

6. Slide the bracket with the new 3.5-inch storage drive into the front-access storage enclosure until it

snaps into position. Press the notch to secure the enclosure cover and lock the enclosure cover with the
key.

Figure 35. Installing the 3.5-inch storage drive into the front-access storage enclosure

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the installation or replacement, go to “Completing the parts replacement” on page 105.

2.5-inch storage drive

To remove or install a 2.5-inch storage drive, do the following:

1. Before removing an old 2.5-inch storage drive, safely eject the old storage drive from the operating

system first. For more information, see the Windows help system.

2. Unlock the enclosure cover with the provided key as shown. Press the notch

to open the enclosure

cover.

Chapter 7

Hardware removal and installation

Summary of Contents for 30BG



















































































































































Search results

Summary of Contents for 30BG

Reviews:

Lenovo 30BG, User Manual, Page: 85 / 146

Search results

Summary of Contents for 30BG

Reviews: