Lenovo 30BG User Manual Download Page 64

Page: 64 / 146

• Clean up your C drive.

1. Click the Start button to open the Start menu.

2. Depending on your Windows version, do one of the following:

– For Windows 7: Click

Computer

– For Windows 10: Click

Windows System

➙

File Explorer

➙

This PC

3. Right-click your C drive and then click

Properties

4. Check the amount of free space, and then click

Disk Cleanup

5. A list of unnecessary file categories is displayed. Select each file category you want to delete, and

then click

• Turn some Windows features off or remove some unnecessary programs.

1. Click the Start button to open the Start menu.

2. Depending on your Windows version, do one of the following:

– For Windows 7: Click

Control Panel

– For Windows 10: Click

Windows System

➙

Control Panel

3. View Control Panel by Large icons or Small icons, and then click

Programs and Features

4. Do one of the following:

– To turn some Windows features off, click

Turn Windows features on or off

. Follow the

instructions on the screen.

– To remove some unnecessary programs, select the program you want to remove, and then click

Uninstall/Change

Uninstall

The free memory space is insufficient.

Solutions:

• Right-click a blank area on the taskbar and open Task Manager. Then, end some tasks you are not

performing.

• Install additional memory modules. To purchase memory modules, go to:

http://www.lenovo.com

Serial connector problem

USB device problems

A USB device cannot be accessed.

Solutions:

• Connect the USB cable from the USB connector to the USB device. If the USB device has its own power

cord, connect the power cord to a grounded electrical outlet.

• Turn on the USB device and keep the device online.

• Install any device drivers or programs supplied with the USB device. Refer to the documentation that

comes with the USB device for more information.

• Disconnect and reconnect the USB connector to reset the USB device.

The Windows 7 operating system cannot be installed from an external optical drive or an external USB
device.

Solution:

P320 User Guide

Summary of Contents for 30BG



















































































































































Search results

Summary of Contents for 30BG

Reviews:

Related manuals for 30BG

Brands by name

Popular brands

Lenovo 30BG, User Manual

Search results

Summary of Contents for 30BG

Reviews:

Related manuals for 30BG

Brands by name

Popular brands