Lenovo 30BG User Manual Download Page 113

Page: 113 / 146

Figure 87. Installing the hard disk drive into the bracket

9. Slide the new hard disk drive into the drive cage until it snaps into position.

Figure 88. Installing the primary hard disk drive

10. Connect the signal cable and the power cable to the new hard disk drive.

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the installation or replacement, go to “Completing the parts replacement” on page 105.

Secondary hard disk drive

Attention:

Do not open your computer or attempt any repair before reading and understanding the “Read

this first: Important safety information” on page iii.

Note:

The secondary hard disk drive is available only on some models.

To replace the secondary hard disk drive, do the following:

Chapter 7

Hardware removal and installation

101

Summary of Contents for 30BG



















































































































































Search results

Summary of Contents for 30BG

Reviews:

Lenovo 30BG, User Manual, Page: 113 / 146

Search results

Summary of Contents for 30BG

Reviews: