Page 24 Operating Manual Leica EM FC7 01/10
4.5
Connecting the Cryochamber
Before connecting the power supply to the main following main supply must be
assured: 100 – 240 VAC, 50 – 60 Hz
The instrument is equipped with protected ground. Before connecting it to the local
electrical supply make sure that the mains has the required ground and that the
instrument is connected to it according to the local regulations.
Unplug the instrument before installing or changing fuses.
In case a Leica EM UC7 instrument table is
available place the power supply onto the
shelf beneath the table board. Connect the
power supply to the mains.
Connect hot plug of the power supply to the
multiway connector on the rear side of the
ultramicrotome (b).
Connect hot plug of cryochamber (d).
Connect hot plug of pump (a).
Multiway connector with hot plugs for pump
(a), power supply (b), control unit (c) and
cryochamber (d).
a
b
c
d
Summary of Contents for EM FC7
Page 1: ...Leica EM FC7 Operating Manual Version 162220032 01 2010...
Page 6: ...Page 5 Operating Manual Leica EM FC7 01 10...
Page 21: ...Page 20 Operating Manual Leica EM FC7 01 10 Remove LN2 hose and take away foam packaging...
Page 38: ...Page 37 Operating Manual Leica EM FC7 01 10 MENU User or Sample profile 1 2...
