manualshive.com logo in svg

Leica BIOSYSTEMS HistoCore BIOCUT, Instructions For Use Manual

Share
Download
Leica BIOSYSTEMS HistoCore BIOCUT Instructions For Use Manual Download Page 9

9

HistoCore BIOCUT

 

Important Information

1

1.2 

Instrument type

All information provided in these Instructions for Use applies only to the instrument type indicated on 
the title page. A nameplate indicating the instrument serial number is attached at the back side of the 
instrument. 

1.3 

Intended purpose

The HistoCore BIOCUT is a manually operated rotary microtome specifically designed for creating 
thin sections of formalin fixed, paraffin embedded human tissue specimens of varying hardness 
used for histological medical diagnosis by a pathologist, e.g. for cancer diagnosis. It is intended for 
sectioning soft and hard human specimens, as long as they are suitable for being cut manually. The 
HistoCore BIOCUT is designed for in vitro diagnostic applications.

Warning 

Any use other than the intended use.

Serious injury of persons and/or damage to specimen.

•  Follow the intended use described in the Instructions for Use. Any other use of the instrument will 

be considered as improper use.

1.4 

Qualification of personnel

•  The HistoCore BIOCUT must be operated by trained laboratory personnel only. The instrument is 

intended for professional use only.

•  All laboratory personnel designated to operate this instrument must read these Instructions for Use 

carefully and must be familiar with all technical features of the instrument before attempting to 
operate it.

Summary of Contents for HistoCore BIOCUT



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands