manualshive.com logo in svg

Leica BIOSYSTEMS HistoCore BIOCUT, Instructions For Use Manual, Page: 59 / 90

Share
Download
Leica BIOSYSTEMS HistoCore BIOCUT Instructions For Use Manual Download Page 59

59

HistoCore BIOCUT

 

Optional Accessories

6

Caution 

After the knife/blade holder is laterally displaced, the specimen is not retracted and retrimmed.

Specimen damage.

•  Retract the object head and retrim the specimen block each time after laterally displacing the 

knife/blade holder.

6.4 

Section waste tray

Fig. 44 

 

1

2

3

The anti-static section waste tray offers ease of 

cleaning due to the anti-static surface.

Push the section waste tray 

(

→

 "Fig. 44-

1

")

 from 

the front to the microtome base plate 

(

→

 "Fig. 

44-

2

")

 until it is held in place by the two magnets 

(

→

 "Fig. 44-

3

")

 (on the front of the microtome base 

plate).

6.5 

Backlighting

Tips 

The backlighting cannot be used with the blade holder base of the two-in-one blade holder E.
To use with backlighting on HistoCore BIOCUT, the External power supply unit Backlighting (Order 

No.: 14 0500 31244) must be ordered separately.

Summary of Contents for HistoCore BIOCUT



























































































Reviews:

No comments