Leica BIOSYSTEMS HistoCore BIOCUT Instructions For Use Manual Download Page 60

Page: 60 / 90

Version 1.7, Revision K

Optional Accessories

Fig. 45

• Remove the two screws

(

→

"Fig. 45-

using a

slotted screwdriver and then remove the cover

plate

(

→

"Fig. 45-

• Insert the backlighting

(

→

"Fig. 45-

in the

recess at the rear of the knife holder base.

• Connect the plug

(

→

"Fig. 45-

of the

backlighting to the plug of the External power

supply unit Backlighting

(

→

"Fig. 45-

Caution

When using super cassette clamp, the orientation is not set to position "0" when directional fixture for

specimen clamps is used with the rigid knife holder base, or the back-lighting illumination is attached.

The instrument may malfunction leading to delayed diagnosis.

• The orientation must be in position "0" and the cover for backlighting illumination must be detached.

• NEVER use the super cassette clamp with backlighting illumination.

• The force balance system has to be adjusted when using the super cassette clamp.

6.6

Top tray

Fig. 46

The top tray is mounted on the hood of the

on both

the top tray and the hood helps to orient the

installation of the top tray.

The top tray is for storage of the utensils used

during sectioning as well as the sectioned

specimens.

6.7

Universal microscope carrier

Tips

Unpack all accessories in the package and check for completeness.

Summary of Contents for HistoCore BIOCUT



























































































Search results

Summary of Contents for HistoCore BIOCUT

Reviews:

Brands by name

Popular brands

Leica BIOSYSTEMS HistoCore BIOCUT, Instructions For Use Manual

Search results

Summary of Contents for HistoCore BIOCUT

Reviews:

Brands by name

Popular brands