manualshive.com logo in svg

Leica BIOSYSTEMS HistoCore BIOCUT, Instructions For Use Manual

Share
Download
Leica BIOSYSTEMS HistoCore BIOCUT Instructions For Use Manual Download Page 7

7

HistoCore BIOCUT

 

Important Information

1

1. 

Important Information

1.1 

Symbols used in the text and their meanings

Danger:

Indicates an imminently hazardous situation which, if not avoided, will result in death 

or serious injury.
Warning:

If this danger is not avoided, then this may result in death or serious injury.

Caution:

Indicates a potentially hazardous situation which, if not avoided, could result in death 

or serious injury.
Note:

Indicates a situation with the potential for property damage which, if not avoided, 

could result in damage to the machine or something in its vicinity.
Tip:

Gives you tips to simplify your workflow.

Item numbers for numbering illustrations.

→

 

"Fig. 7 - 

1

"

Numbers in red refer to item numbers in illustrations.

Manufacturer

Order number

Serial number

Date of manufacture

Observe the Instructions for Use.

Caution, consult the instructions for use for cautionary information.

In vitro diagnostics (IVD) medical device

The CE marking is the manufacturer's declaration that the medical product meets the 

requirements of the applicable EC directives and regulations.

The Country of Origin box defines the Country where the final character 

transformation of the product has been performed.

1

Summary of Contents for HistoCore BIOCUT



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands